Payamsaderat Lubricant Additives The additive content in lubricating oils ranges from just a few parts per million to several percentage points depending on the function that the additives develop they may be classed as Improve the c... Jun 23, 2022
Payamsaderat Properties of Lubricants It is basically required to understand the properties of lubricants and the terms used to describe them in order to select the right lubricant product. 1. Viscosity Viscosity is used to measure how th... Jun 23, 2022
Payamsaderat STORAGE AND HANDLING Storage: Outdoor Storage Indoor Storage Outdoor Storage Ideally, lubricants should be stored under cover of a reasonably constant, moderate temperature. Weathering can obliterate the labels on contain... Jun 23, 2022
Payamsaderat ILSAC ENGINE SERVICE CLASSIFICATIONS ILSAC ENGINE SERVICE Founded in 1992, the International Lubricant Standardization and Approval Committee (ILSAC) is an organization through which Ford, General Motors, Chrysler and the Japan Automobil... Jun 23, 2022
Payamsaderat ACEA CLASSIFICATION ACEA CLASSIFICATION ACEA stands for "Association des Constructuers Européens de l’Automobile". This classification system is the European equivalent of the API classification system, but is stricter a... Jun 23, 2022
Payamsaderat API (American Petroleum Institute) API The current and previous API Service Categories are summarized in convenient charts. Vehicle owners should refer to their owner's manuals before consulting these charts. Oils may have more than on... Jun 23, 2022
Payamsaderat ISO Viscosity Grade (ISO VG) ISO Viscosity Grade (ISO VG) The ISO VG (Viscosity Grade) classification is recommended for industrial applications. The reference temperature of 40 °C represents the operating temperature in machiner... Jun 23, 2022
Payamsaderat SAE Classification for Gear oil SAE Classification for Gear oil Automotive gear lubricants play an important role in the drive for greater fuel efficiency as well as reduced greenhouse gas emissions. OEMs seek to make efficiency imp... Jun 23, 2022
Payamsaderat Recycling and Disposing of Cutting Oils Recycling and Disposing of Cutting Oils "What are the safety measures for the disposal of cutting oil? Is it possible to process and reuse it?" In general, cutting oils can be reused several times and... May 28, 2022
Payamsaderat Tribology T ribology comprises the fields of friction, wear and lubrication. It aims at the functional, economical and ecological optimization of motion systems. The implementation of tribological knowledge res... May 28, 2022
Payamsaderat SAE for Engine oil SAE Classification for Engine oil SAE International, formerly named the Society of Automotive Engineers, and SAE J300 is a standard that defines the viscometric properties of mono- and multi-grade eng... May 25, 2022
Payamsaderat Understanding the Difference Between Used Oil and Waste Oil T here is a lot of time and money invested in getting good, clean oil delivered to industrial sites around the world today. Upon initial reception at proactive, best-practice facilities, a lubricant m... May 25, 2022